AUGIER: Energy - Public Lighting - Substation Equipment

Substation Equipment

CEP-EP 12/13 SwitchGear

The CEP-EP12/13 switchgear is intended for the control, protection and monitoring of long distance public lighting networks, up to 20 km.

CEP-EP 12/13 Switchgear
(Click to view PDF file)

CEP-EP 12/13 Module

Standard Features :

The unit is designed using a modular approach, because it is built around a main microprocessor. This structure provides an opportunity to respond to customer specifications and make the unit able to comply with the needs of most public lighting networks.

The contactors are for safety and maintenance purposes located on a trolley to secure a visible network cut-off from the main busbar supply.

Option :

Voltage monitoring

Current monitoring

Electrical consummation monitoring

Control by serial communication with PLC through a RS485 connection.

PTI Substations

The substations from Augier are modular units that ensure the operation of the transformer substation. Models in the PTI (Postes de Transformation Integres) series are available for both indoor or outdoor use, and also for either step up or step down configuration. The PTI series has four variations, the PTS (Standard), PTC (Compact), PTM (Modular) and PTMI (with Load Break Switch).

The mini substations are designed to supply long distance public lighting networks from Low Voltage networks (LV from 120 to 415 V) by stepping-up the voltage to Medium Voltage (MV from 1 to 6.9 kV). The substations are also designed to supply networks from Medium Voltage networks (MV 1 to 6.9 kV) by stepping-down the voltage to Low Voltage (LV 120 to 415 V).

The LV and MV coils of the PTI substations are varnish impregnated and the transformers are delivered in an aluminium or a steel enclosure. The power rating range is from 16 to 160 kVA (other specifications on request).

PTC (outdoor type)
(Click to view PDF file)

PTC (indoor type)

Standard Features :

Safety Lock - to prevent access to the MV compartment (access is only gained by ensuring that all protection features/isolating switches are "open")

Transformer Design - typically our dry type transformers (with impregnated windings) are used, but certain models have IP68 sealed transformers.Oil transformers are available on request.

Fuses - HRC Fuses

Output cut-off rotating switch on the MV side

Enclosures - The outer casing is IP 21 compliant (indoor version) or IP 44 compliant (outdoor version)

Standards - The PTI models are compliant with the NFC 13200 and NFC 64400 standards.

Options :

LV circuit-breaker

LV contactor for illumination control (PCEL only)

Earthing switch on the MV side

Differential protection relay

Thermal sensor and relay

Micro-switches connected to the MV fuses trips-out the installation, if the one fuse blows

Other specifications on request.

Technical Specifications :

Power range 25, 50, 80, 100, 125, 160 kVA

Input voltage for step-up transformer 400 or 230 V

Input voltage for step-down transformer 5.5 or 3.2 kV

Output voltage for step-up transformer 5750 V or 3360 V

Output voltage for step-down transformer 410 V or 237 V

MV insulation 7.2 kV

LV insulation 1.1 kV

Possible connections 3 phase/1 phase, 3 phase/2 phase and 3 phase/3 phase.

Concrete MV Substation

The concrete substation is designed for electricity distribution at 5.5 kV and it is available in a Step-up and Step-down substation to make a complete system.

Concrete MV Substation

Concrete MV Substation with TED Transformers

Standard Features

Comply with the NFC 13100, 13200, 15100 HN 65 S 41 standards

The characteristic functions are optimised

The substation is pre-wired in house

Easy installation and connection on site

Installation assistance available from Augier SA

Other specifications on request

Option

Fuse protection module 20 kV

Consumption meter

Oil or dry type transformer

Power regulator module

MV protection and demand module

Enclosure of LV auxiliary demand voltage

Connections for HV/MV/LV

Pad lock protection for HV/MV/LV.

Technical Specifications

Power range from 100 to 1250 kVA

Input voltage for step-up transformer 400 V (other values on request)

Input voltage for step-down transformer 20 kV (other values on request)

Output voltage for step-up or step-down transformer 5750 V or 3200 V (other values on request)

Voltage insulation step-up 7.2 kV

Voltage insulation step-down 24 kV.

Mobile MV Substation

The Mobile MV substation provides the same quality and performance as the Concrete MV substation, but it offers increased flexibility through its mobility on wheels.
The mobile MV substation is designed to supply 6.6 kV networks through its varnish impregnated transformer. The substation is delivered in an aluminium enclosure on wheels.

The Mobile MV substation is successfully being used at a nuclear power plant in France, where the mobility is needed during maintenance of the site, when the standard electricity installations are switched off.

Mobile Substation

CEP-EP 12/13 SwitchGear
	The CEP-EP12/13 switchgear is intended for the control, protection and monitoring of long distance public lighting networks, up to 20 km.	CEP-EP 12/13 Switchgear (Click to view PDF file) CEP-EP 12/13 Module
Standard Features :
	The unit is designed using a modular approach, because it is built around a main microprocessor. This structure provides an opportunity to respond to customer specifications and make the unit able to comply with the needs of most public lighting networks. The contactors are for safety and maintenance purposes located on a trolley to secure a visible network cut-off from the main busbar supply.
Option :
	Voltage monitoring Current monitoring Electrical consummation monitoring Control by serial communication with PLC through a RS485 connection.
PTI Substations
	The substations from Augier are modular units that ensure the operation of the transformer substation. Models in the PTI (Postes de Transformation Integres) series are available for both indoor or outdoor use, and also for either step up or step down configuration. The PTI series has four variations, the PTS (Standard), PTC (Compact), PTM (Modular) and PTMI (with Load Break Switch). The mini substations are designed to supply long distance public lighting networks from Low Voltage networks (LV from 120 to 415 V) by stepping-up the voltage to Medium Voltage (MV from 1 to 6.9 kV). The substations are also designed to supply networks from Medium Voltage networks (MV 1 to 6.9 kV) by stepping-down the voltage to Low Voltage (LV 120 to 415 V). The LV and MV coils of the PTI substations are varnish impregnated and the transformers are delivered in an aluminium or a steel enclosure. The power rating range is from 16 to 160 kVA (other specifications on request).	PTC (outdoor type) (Click to view PDF file) PTC (indoor type)
Standard Features :
	Safety Lock - to prevent access to the MV compartment (access is only gained by ensuring that all protection features/isolating switches are "open") Transformer Design - typically our dry type transformers (with impregnated windings) are used, but certain models have IP68 sealed transformers.Oil transformers are available on request. Fuses - HRC Fuses Output cut-off rotating switch on the MV side Enclosures - The outer casing is IP 21 compliant (indoor version) or IP 44 compliant (outdoor version) Standards - The PTI models are compliant with the NFC 13200 and NFC 64400 standards.
Options :
	LV circuit-breaker LV contactor for illumination control (PCEL only) Earthing switch on the MV side Differential protection relay Thermal sensor and relay Micro-switches connected to the MV fuses trips-out the installation, if the one fuse blows Other specifications on request.
Technical Specifications :
	Power range 25, 50, 80, 100, 125, 160 kVA Input voltage for step-up transformer 400 or 230 V Input voltage for step-down transformer 5.5 or 3.2 kV Output voltage for step-up transformer 5750 V or 3360 V Output voltage for step-down transformer 410 V or 237 V MV insulation 7.2 kV LV insulation 1.1 kV Possible connections 3 phase/1 phase, 3 phase/2 phase and 3 phase/3 phase.
Concrete MV Substation
	The concrete substation is designed for electricity distribution at 5.5 kV and it is available in a Step-up and Step-down substation to make a complete system.	Concrete MV Substation Concrete MV Substation with TED Transformers
Standard Features
	Comply with the NFC 13100, 13200, 15100 HN 65 S 41 standards The characteristic functions are optimised The substation is pre-wired in house Easy installation and connection on site Installation assistance available from Augier SA Other specifications on request
Option
	Fuse protection module 20 kV Consumption meter Oil or dry type transformer Power regulator module MV protection and demand module Enclosure of LV auxiliary demand voltage Connections for HV/MV/LV Pad lock protection for HV/MV/LV.
Technical Specifications
	Power range from 100 to 1250 kVA Input voltage for step-up transformer 400 V (other values on request) Input voltage for step-down transformer 20 kV (other values on request) Output voltage for step-up or step-down transformer 5750 V or 3200 V (other values on request) Voltage insulation step-up 7.2 kV Voltage insulation step-down 24 kV.
Mobile MV Substation
	The Mobile MV substation provides the same quality and performance as the Concrete MV substation, but it offers increased flexibility through its mobility on wheels. The mobile MV substation is designed to supply 6.6 kV networks through its varnish impregnated transformer. The substation is delivered in an aluminium enclosure on wheels. The Mobile MV substation is successfully being used at a nuclear power plant in France, where the mobility is needed during maintenance of the site, when the standard electricity installations are switched off.	Mobile Substation