AUGIER: Energy - Public Lighting - Regulator-Variators

Regulators-Variators

The advantages of using a regulator-variator are more than just voltage control, because the technology also provides control over the power consumption of the receptors, which extents the expected lifetime and brings considerable savings of energy consumption.

The Augier induction variator-regulator offers the regulation technology necessary to improve the expected lifetime of your installation. This is achieved by the direct voltage compensation due to fluctuations on the supply network such as those caused by varying loads.

Variateur LV Induction Regulator

The LV voltage THR 38 RB regulator-variator is available for three phase connection for powers between 10 to 160 kVA. The THR facilitates automatic or pre-set variation of the network voltage. The voltage can be between 50-100% of the nominal value, which provides the opportunity to adjust the illumination level accordingly.

THR 38 RB Regulator-variator
(Click to view the PDF File)

Some Applications

Power reductions at times with less road traffic

Adjustment to suit weather conditions as drizzle, fog or wet road surface

Modular illumination of tunnels to facilitate entry and exit brightness levels

Regulation of the interior lighting of supermarkets and warehouses that use fluorescent tubes.

Variateur MV Induction Regulator

The range of MV voltage induction regulator-variators from Augier SA includes three different versions. The MHR 320 for single-phase regulation, the DHR 320 for two-phase and the THR 550 three-phase regulation.

An induction motor using the rotating movement of the rotor in front of the stator provides the variation in output voltage. The unit is driven directly by an electrical motor and a reductor mounted on the top of the variator-regulator. There is easy access to all components and no sliding electrical contacts, which reduces maintenance and provides an exceptional long lifetime for the regulators.

A wall-mounted control cabinet contains the remote control and local commands. It is supplied with a 6 m cable and all connections between the cabinet and the variator.

THR 550 Regulator-variator

Standard Features

Switch on the front of the control cabinet to choose the following functions "Auto", "Local", or "Safety"

Voltmeter at control cabinet

"Minus" and "Plus" push buttons to control level of output.

Technical Specifications

Indoor type equipment

Frequency is 50 Hz

Automatic control of +/- 1.5 %

Dielectric is oil

Thermal probe embedded in the windings provides equipment protection.

MHR 320 RB for single-phase connection

Power ratings available are 100, 160, 250 kVA

Input voltage is 3200 V

Minimum output voltage is 2540/2760 V

Maximum output voltage is 3200 V.

DHR 320 RB for two-phase connection

Power ratings available are 100, 160, 250, 315, 500 kVA

Input voltage is 3200 V

Minimum output voltage is 2540/2760 V

Maximum output voltage is 3200 V.

THR 550 RB for three-phase connection

Power ratings available are 160, 250, 315, 500, 630 kVA

Input voltage is 5500 V

Minimum output voltage is 4370/4750 V

Maximum output voltage is 5500 V

Variateur LV Induction Regulator
	The LV voltage THR 38 RB regulator-variator is available for three phase connection for powers between 10 to 160 kVA. The THR facilitates automatic or pre-set variation of the network voltage. The voltage can be between 50-100% of the nominal value, which provides the opportunity to adjust the illumination level accordingly.	THR 38 RB Regulator-variator (Click to view the PDF File)
Some Applications
	Power reductions at times with less road traffic Adjustment to suit weather conditions as drizzle, fog or wet road surface Modular illumination of tunnels to facilitate entry and exit brightness levels Regulation of the interior lighting of supermarkets and warehouses that use fluorescent tubes.
Variateur MV Induction Regulator
	The range of MV voltage induction regulator-variators from Augier SA includes three different versions. The MHR 320 for single-phase regulation, the DHR 320 for two-phase and the THR 550 three-phase regulation. An induction motor using the rotating movement of the rotor in front of the stator provides the variation in output voltage. The unit is driven directly by an electrical motor and a reductor mounted on the top of the variator-regulator. There is easy access to all components and no sliding electrical contacts, which reduces maintenance and provides an exceptional long lifetime for the regulators. A wall-mounted control cabinet contains the remote control and local commands. It is supplied with a 6 m cable and all connections between the cabinet and the variator.	THR 550 Regulator-variator
Standard Features
	Switch on the front of the control cabinet to choose the following functions "Auto", "Local", or "Safety" Voltmeter at control cabinet "Minus" and "Plus" push buttons to control level of output.
Technical Specifications
	Indoor type equipment Frequency is 50 Hz Automatic control of +/- 1.5 % Dielectric is oil Thermal probe embedded in the windings provides equipment protection.
MHR 320 RB for single-phase connection
	Power ratings available are 100, 160, 250 kVA Input voltage is 3200 V Minimum output voltage is 2540/2760 V Maximum output voltage is 3200 V.
DHR 320 RB for two-phase connection
	Power ratings available are 100, 160, 250, 315, 500 kVA Input voltage is 3200 V Minimum output voltage is 2540/2760 V Maximum output voltage is 3200 V.
THR 550 RB for three-phase connection
	Power ratings available are 160, 250, 315, 500, 630 kVA Input voltage is 5500 V Minimum output voltage is 4370/4750 V Maximum output voltage is 5500 V