Home Our Products Airports equipment

DIAM 4200

Features

DIAM4200 constant current regulators are static devices controlled by an AC chopper using IGBTs transistors. They deliver a fully sinusoidal output current wave independently of load.

They are designed to maintain constant the output current, displayed and adjustable, independently of any changes in load or power supply.

These devices are specifically designed for powering series circuits of runway lighting, especially for LED lighting, for which they  provide a clean power without current harmonics or wave distortion regardless the brightness or  the load.

They comply to all international standards

Notice technique 1 - 2.5 kVA Notice technique 5 - 15 kVA

Specification :

  • Supply: Single-phase phase 220, 230, 240 Vac, or 380, 400, 415 Vac  +/-10% (IEC type) or –5/+10% (FAA type).
  • Frequency : from 45 to 66Hz
  • Output rated current : 6,6 A
  • Max output power : 2.5 kVA with reduced stackable S, 15 kVA with standard cabinet L, or 30kVA with XL cabinet.
  • Power factor : Not degraded ; on real lamps load: typically 0,97.
  • Efficiency : > 90% at rated parameters.
  • Output current accuracy : Better than ±1% under the following conditions : Power supply voltage: ± 10% (IEC) or –5/+10% (FAA) – Frequency from 45 to 66Hz, Load from 0 to 100%
  • Remote control : Voltage, from 20V to 60V DC, or dry contacts, or serial single or double network..
  • Back indication: Static dry contacts (IEC type), or relay contacts (FAA), or serial network
  • Black current : preferred value 1.5 or 1.8 A
  • Output waveform : Pure sinusoid.
Normes :

OACI : Airports design manual, part 5
CEI : 61822 ed. 2009
FAA : AC150/5345-10h
AENA : PPT002 ed. 2004

 

 

 

Contact

Formulaire de contact